Semi-Truck Windshield Repair & Replacement in Atlanta, GA
Need semi-truck windshield repair in Atlanta? Midtown Glass Atlanta has handled commercial fleets since 1956, with heavy-duty truck windshield replacement and repair for every major cab: Freightliner, Peterbilt, Kenworth, Volvo, Mack, International. Owner-operators can bring a single truck to our shop at 510 Glen Iris Dr NE, and for fleets our mobile units come to the yard, warehouse, or distribution center to keep downtime short. We also cover standard auto glass and windshield replacement for the cars in your personal driveway. Need it after hours? Ask about emergency service, 24/7. Every install meets DOT and FMCSA standards with the seal verified. Get the trucks rolling again. Call (404) 873-6991.
Semi-truck windshield repair that keeps you legal
Midtown Glass Atlanta has fixed commercial truck glass in Atlanta since 1956. A cracked windshield is both a safety problem and a DOT problem, so timing matters. Our techs use proper resin and method to repair chips and short cracks, often inside an hour, restoring strength and keeping the cab compliant with federal rules for commercial vehicles, which usually saves you the cost and downtime of a full pane. A small chip on a tractor will not stay small. The constant vibration and frame flex of a loaded rig runs cracks faster than on a passenger car, so the smart move is to catch it early. Call (404) 873-6991 and we will look at it and tell you straight whether it repairs or needs replacing.
Replacement you can count on for the whole fleet
When a truck windshield is past repair, we replace it with DOT-compliant AS-1 glass and commercial-grade urethane built for heavy-duty service. Many cabs run two-piece windshields, and we carry both halves for the common Freightliner Cascadia, Peterbilt 579, Kenworth T680, Volvo VNL, Mack, and International builds. We set the glass, verify the seal, and give the driver the safe drive-away time before the truck moves, since the adhesive needs the right cure window to hold in a crash. On a two-piece setup we set the driver half and the passenger half in sequence so the center bar lines up clean, and we transfer any heated wiper-park element, defrost tab, or antenna lead the cab came with. The AS-1 marking stays readable at the base of the glass, which is exactly what a DOT inspector checks for. Every job includes a quality check and warranty, and we can document the glass spec for your fleet records and DOT inspections.
Mobile fleet service across metro Atlanta
Time off the road is money, so we bring the work to the truck. Our mobile units run to fleet yards, warehouses, and distribution centers up and down the Downtown Connector and around the I-285 perimeter, including the freight hubs out toward Conley and the south side. The crew carries heavy-duty glass for the major brands and everything needed for a clean on-site install. We schedule around your operation, during a driver's rest break, between loads, or overnight, so a truck is not pulled off a run just for glass. If you run a board of trucks, we can batch several units in one visit and work down the line, so your dispatcher coordinates it once. Owner-operators who would rather come to us can bring a single tractor to the Glen Iris shop. Call (404) 873-6991 to set up mobile fleet service or a shop appointment.
Why fleets and owner-operators pick Midtown Glass Atlanta
For semi-truck glass in Atlanta, operators have trusted Midtown Glass Atlanta since 1956. A few reasons: 1. Experience: certified techs who work commercial cabs day in and day out. 2. Uptime: we move fast and schedule around your routes to keep trucks rolling. 3. Mobile reach: on-site service at yards and distribution centers across metro Atlanta. 4. Insurance and fleet billing: we work with most carriers and set up accounts for volume. Choosing us is not just a new windshield; it is a partner who knows what a parked truck costs. Call (404) 873-6991 for semi-truck windshield repair or replacement, at your yard or at our shop.
Semi-Truck Windshield FAQs
What does a semi-truck windshield replacement cost?
Most semi-truck windshields run $300 to $800 or more, set by the make and model, the glass type, and extras like defrost wiring or a rain sensor. The common Freightliner, Peterbilt, Kenworth, Volvo, and International cabs fall in that band; rarer trucks can run higher. Most commercial and fleet policies cover replacement. We quote free for any truck. Call (404) 873-6991 with your unit and we will price it.
Do you bring mobile service to trucks?
Yes. We run mobile semi-truck service across metro Atlanta, straight to your yard, warehouse, distribution center, or a truck stop. The units carry heavy-duty glass for the major brands and the gear for a full on-site install. The truck never has to leave your lot, which is the whole point: a parked truck costs money, so we keep the job where the truck already is.
Which truck brands do you service?
All the majors: Freightliner, Peterbilt, Kenworth, Volvo, Mack, International, Western Star, and Navistar. We also do medium-duty trucks, box trucks, delivery vans, and specialty commercial units. Our stock covers most model years, and we can source specialty glass quickly. One owner-operator truck or a hundred-unit fleet, we have the inventory and the hands.
How long does a truck windshield replacement take?
Figure 1.5 to 2.5 hours for the actual install, depending on the cab and whether it is gasket-set or urethane-bonded. After that, safe drive-away time is what keeps the glass safe in a crash, usually 2 to 4 hours for the adhesive to cure. For fleets we often schedule during a rest break or overnight so the cure time lands on downtime instead of road time. In a cold snap we use a fast-cure urethane and still give the adhesive extra time, since low temperatures slow the bond and push the safe drive-away time toward the longer end. We give exact timing when you book.
Do your truck windshields meet DOT and FMCSA rules?
Yes. Every semi windshield we install meets DOT and FMCSA requirements. We use AS-1 certified glass, the grade required for commercial vehicles, and follow the proper sealing and mounting spec so the truck holds up at inspection. A correct install matters for passing DOT checks and keeping your operating authority, and we can hand over documentation of the glass spec for your records.
Can you handle fleet accounts and billing?
Yes, from a single owner-operator to a large carrier. We set up fleet pricing, consolidated billing, priority scheduling, and a point of contact for the account. We work directly with fleet insurers and handle warranty claims without the runaround. The mobile service is built for fleets, since we come to your facility and keep trucks off the sidelined list. Call us to open an account and talk volume rates.
Do you repair truck windshields or only replace?
Both. A chip under a quarter or a crack under 6 inches that sits outside the driver's main view can often be repaired, which saves time and money. But a loaded rig flexes hard, so once damage gets past minor we usually lean toward replacement. Our techs give you the honest call, repair when it is safe, replace when DOT compliance and safety say it is the better move.
What about the other glass on the truck?
We do all of it, not just the windshield. That covers door glass, vent glass, side and rear windows, sleeper cab windows, and mirrors on tractors and commercial units, plus specialty glass for different configurations. If a commercial vehicle has glass that needs work, our mobile service can handle it across the Atlanta metro.
Damage Assessment
4 questions · instant result
What type of damage do you see?
Fleet windshield service that cuts downtime
Keep the trucks moving with Midtown Glass Atlanta. Mobile repairs and replacements at your yard, DOT-compliant AS-1 glass, same-day where we can, and shop appointments for owner-operators. We have served Atlanta trucking since 1956. Call for a fleet quote.